Feb 16, 2022

عمارت کی روشنی کا بنیادی لائٹنگ طریقہ؟

ایک پیغام چھوڑیں۔

سیلاب کی روشنی


  The products used are فلڈ لائٹساوراسپاٹ لائٹس. کچھ اونچی-عمارتوں کے لیے، پوری عمارت یا عمارت کے کچھ پھیلے ہوئے حصوں کو یکساں طور پر روشن کرنے کے لیے لائٹس کا استعمال کیا جا سکتا ہے۔ اس کی مختلف چمک، مختلف سائے کی تبدیلیوں اور تضادات، رنگوں کی ملاپ وغیرہ کے ساتھ، عمارت اندھیرے میں ایک شاندار اور روشن اثر حاصل کر سکتی ہے۔

1644976789(1)

  When designing the floodlight performance, the installation position of the lamps should be considered. Generally, the following aspects should be considered:


  1. Install it in the building itself, such as on the balcony and awning. Use the balcony railings to conceal the lights. At this time, pay attention to the brightness of the wall should have a certain change to avoid the dull feeling caused by the same brightness in a large area.

11

  2. The lamps are placed on the ground near the building. At this time, since the lamps are located near the audience, it is particularly necessary to prevent the lamps from being directly exposed to the audience's field of vision, and the light-emitting surface of the lamps cannot be seen, causing glare. Generally, greening or other accessories (such as grilles and shading plates) can be used to cover them. At this time, care should be taken not to place the lamps too close to the wall.


  3. Install it on roadside light poles or special bracket poles. This is especially suitable for narrow streets and low-rise buildings, such as ancient buildings in the old city, where the height of the mounting bracket is greater than 2 meters to avoid the impact of lights on pedestrians.


  4. Put it on the adjacent or opposite building. The main reason is that the installation of the building itself is difficult, and the surrounding environment and site are limited. In this case, the lamps can be considered to be installed on other buildings.

 (13)

اندرونی ٹرانسمیشن لائٹنگ


جدید عمارتوں میں، بہت سی عمارتوں میں شیشے کے پردے کی دیواریں استعمال ہوتی ہیں۔ استعمال شدہ مصنوعات عام طور پر ہیںنقطہ روشنی کے ذرائعیاگرڈ سکرین. یہ شیشے کی روشنی جذب اور ٹرانسمیشن کی وجہ سے ہے. اگر بیرونی لائٹنگ کا استعمال کیا جائے تو نہ صرف یہ کہ روشن ہونا ناممکن ہو گا بلکہ عمارت میں روشنی کی آلودگی بھی بہت زیادہ ہو گی۔ اس طرح کے مسائل پر قابو پانے کے لیے، اندرونی روشنی کی ترسیل کا لائٹنگ طریقہ عام طور پر اپنایا جاتا ہے۔ یہ کمرے میں پوائنٹ لائٹ سورس یا گرڈ اسکرین لیمپ کی تنصیب کا استعمال کرتا ہے اور شیشے کے ذریعے روشنی کو باہر کی طرف منتقل کرتا ہے۔ ڈیزائن کے عام طریقوں میں انڈور لائٹ ریفلیکشن اور لائٹ سٹرپ بریکٹ لائٹنگ شامل ہیں۔ ، براہ راست باہر کی روشنی، اور اسی طرح.


کونٹور لائٹنگ


  The عمارت کی روشنیشہر کے مرکزی علاقے میں بنیادی طور پر خاکہ اظہار ہے. استعمال کرنالائن روشنیمصنوعات، یہ رات کے تاریک آسمان کو پس منظر کے طور پر لیتا ہے اور عمارت کے خاکے کو خاکہ بنانے کے لیے عمارت کے دائرے کے ساتھ ترتیب دی گئی روشنیوں کا استعمال کرتا ہے۔


انکوائری بھیجنے